HP Multi-Site Traffic Director sa9200 - Manual (Page 71)

C H A P T E R 5 Accessing the Boot Monitor
65
setup Initiates the setup procedure of the SA9200. The system displays
prompts for all inputs necessary to initialize system.
Example:
monitor>setup
Auto config NIC card? [n] --->y
Done Ether config: auto
Enter hostname [nsb-9] --->
Autoboot? [enable] --->
Enable DHCP? [n] --->
Enter domain (’-’ to delete) [mysite_ex.com] --->
Primary name server (’-’ to delete) [10.1.1.10] -->
Add additional name server (<return> to end) [] --->
Enter IP address [10.1.1.1] --->
Enter Netmask [255.255.254.0] --->
show
NOTE: Use the dir
command to display
the list of saved
configuration files.
Displays a specified saved boot configuration file. Type show, then the
name of the configuration file you wish to view.
Example:
monitor>show
Configuration file name? [] ---><filename>
Command Description
Boot Monitor Command Reference