HP Multi-Site Traffic Director sa9200 User Manual
Page 43
C H A P T E R 4
Scenario 1
37
HP SA9200/config/dns/zones/geo.mstd-ex.com/
hostnames/www# info
Host: www
Method: flash TTL: 60 Return Authoritative:Yes
Max Additional Responses: 0 Multi-VIP Standby:Disable
Site Services:
westcoastsite:10.2.1.100:80
westcoastbroker:10.2.1.50:80
eastcoastbroker:10.2.2.50:80
Step 4. Commit the new configuration.
At this point, you can save and commit the configuration.
HP SA9200/config/dns/zones/geo.mstd-ex.com/
hostnames/www# save before-upgrade
Configuration saved
HP SA9200/config/dns/zones/geo.mstd-ex.com/
hostnames/www# commit all
Warning: Your active configuration will be
overwritten.
Are you sure you want to commit the
configuration (yes|no) ? yes
Configuration has been committed
Step 5. Bring the new eastcoastbroker hardware on line.
After the commit, the site known as eastcoastsite no longer receives
traffic from new referrals. It may still continue to receive some
residual traffic from cached referrals or current connections.
Configure the load balancer known as the eastcoastbroker. Verify
that it has the service 10.2.2.50:80 configured.
Step 6. Enable the eastcoastbroker and delete the
westcoastsite.
Similar to disabling an agent, enabling an agent automatically
enables all of its services mapped to hostnames.
HP SA9200/config/dns# agents
HP SA9200/config/dns/agents# eastcoastbroker
enable
Agent Enabled