HP Multi-Site Traffic Director sa9200 - Manual (Page 66)

C H A P T E R 5 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide
60
factory_reset
NOTE: factory
_reset does not
delete saved
configuration files.
CAUTION: This
command rewrites
the default
configuration to the
default.cfg
configuration file.
Resets the system to factory defaults. Values affected by this command
are:
• Entire current DNS configuration is deleted
• Route parameters
• CLI parameters
• IP address
• Default route
• Hostname
• Domain
• Name servers
• DHCP is disabled
• Autoboot is set to “enabled”
halt Halts the SA9200 system.
Command Description
Boot Monitor Command Reference