HP Multi-Site Traffic Director sa9200 - Manual (Page 75)

C H A P T E R 6 Command History
69
Command
History
The SA9200’s CLI records recently executed commands and allows
you to review them.
history <n>
With no parameter <n> specified, history displays the last ten
commands entered by the user. The integer <n> specifies the history
index number. When <n> is specified on the command line, the ten
commands executed before that of the specified index number are
displayed.
! <n> or h <n>
NOTE: You must include
a space between the “!” or
“h” and the history index
number
.
Executes the command beginning at the specified history index
number.
Esc-> Go to end of Command History
Esc-Backspace or
Esc-CTRL-H Delete previous word
Esc-B Move insertion point back one word
Esc-C Capitalize letter and move to end of word
Esc-D Delete from cursor to end of word
Esc-F Move insertion point forward one word
Esc-L Make letter lower case and move insertion point to end of
word
Esc-U Capitalize entire word
Insert Toggle insertion mode (insert or overwrite)
Key Combinations