HP Multi-Site Traffic Director sa9200 - Manual (Page 103)

C H A P T E R 6 System Commands
97
install
NOTE: Save your
configurations before
installing or booting a new
image. Up to five (5)
images can be installed on
a SA9200.
Download and install SA9200 software through the FTP protocol.
Once installed, images are selected for execution by using the
command,
config sys software boot .
Syntax (ftp):
config sys software install <ftp url> {user <user
name>} {password <password>}
where:
url is a valid URL identifying the software image to download.
It must be of the form ftp://<host>/<path_name>.
user name is the user name to use for logging in during file
transfer (ftp only).
password is the password to use for logging in during file
transfer (ftp only).
boot
NOTE: Save your
configurations before
installing or booting a new
image.
Select a software image and reboot the system under that image.
Syntax:
config sys software boot <index>
where:
index is a valid index number of an installed software image,
as displayed using the command, show sys software
info .
delete Delete old versions of the software from local storage. It can be
used to free local storage to install a version update or product
upgrade.
Syntax:
config sys software delete <index>
where:
index is a valid index number of an installed software image,
as displayed using the command,
config sys software info
(also: show sys software info)
Command Description
Config Sys Commands