HP Multi-Site Traffic Director sa9200 - Manual (Page 119)

C H A P T E R 6 DNS Commands
113
Config DNS ISV Groups Command
weight Sets a weight of an agent service. Services with higher weight are
favored over services with lower weight.
Syntax:
weight <weightnumber>
where
weightnumber is between 1 and 255. Default is 1.
factor Sets the threshold for an agent service based on the load
balancing method (CPU/AVGRESP/LEAST CONN).
Syntax:
factor <factornumber>
Where:
factornumber is between 1 and 255. Default is 10
Command Description
Config DNS Agents Commands
Command Description
config dns isvgroups Changes the prompt to the config dns isvgroups command level.
info Displays configured information of all ISV Groups in this
SA9200.
For example:
ISV Group: isv2
State: Enabled Probe Interval:30 Probe Timeout:15
Primary Flash Src:10.1.1.1 Primary Flash Port:2000
Backup Flash Src: 10.1.1.2 Backup Flash Port: 2000
ISV Group: isv3
State:Enabled Probe Interval:30 Probe Timeout:15
Primary Flash Src: Not Defined Primary Flash Port:0
Backup Flash Src: Not Defined Backup Flash Port:0
Probe Interval: How frequently the services in an ISV group are
polled for availability.
Probe Timeout: How long to wait for a response to an ISV service
availability poll.
Config DNS ISV-Groups Commands