HP Multi-Site Traffic Director sa9200 - Manual (Page 113)

C H A P T E R 6 DNS Commands
107
rename Changes the agent’s current name to the name specified in the
command line.
Syntax:
config dns agents rename <agentname> new
<agentname>
where:
agentname (1) is the current name of the agent whose name
you wish to change.
agentname (2) is the new name to be assigned to the agent.
config dns agents
<agentname> Changes the prompt to the config dns agents <agentname>
command level.
info Displays configured information of the specified agent.
For example:
Agent: 10.1.1.1
State:Enabled Metrics Interval:30 Metrics Timeout:15
Agent IP: 10.1.1.1 Agent Port: 1999
Primary Flash Src: Not Defined Primary Flash Port:0
Backup Flash Src: Not Defined Backup Flash Port:0
Services:
10.1.1.3:80
stats Displays the statistical information of the specified agent,
including any services. Information displayed includes.
• Agent Name and Version
• State: (Connected state of agent)
• CPU Util: (Processor Use)
• Connection/Sec:
• Service name(s): (IP address and port number)
• Service referrals, response time, flash referrals, and
connections/sec
For example:
Agent: 10.1.1.1 (Version Unknown)
State: Connected CPU Util: 0% Connections/Sec: 0
Service: 10.5.5.5:90 (0 Servers)
Referrals: 0 Flash Referrals: 0
Response Time: 0 Connections/Sec: 0
Command Description
Config DNS Agents Commands