HP Multi-Site Traffic Director sa9200 - Manual (Page 122)

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide
116
flash-backup-src Configures a backup source address to which queries are routed,
in the event of this SA9200 not being functional. The backup
source address is the IP address of another SA9200 or a load
balancer with a flash-agent configured.
For example:
flash-backup-src 10.1.1.2
flash-backup-port Configures the port number with which the backup flash source
communicates with its known peers. The default port number is
2000.
config dns isvgroups
<isvname> services Changes the prompt to the config dns isvgroups <isvname>
services for a specific ISV service for a specific ISV group.
info Displays configured information of all services for the specified
ISV group.
For example, with one service:
Service: 10.10.9.8:80
Service IP: 10.10.9.8 Service Port: 80
Probe Method: none
stats Displays statistical information for the specified service.
enable Enables all services that are configured for this ISV group to all
hosts that map to them. Default is enabled.
disable Disables all services that are configured in this specified ISV
group.
standby Places all services in standby mode for the specified ISV group.
Standby services are enabled when enabled services are
unavailable.
create Creates a service where <servicename> is a VIP:port
combination.
delete Deletes a service where <servicename> is a VIP:port
combination.
rename Changes the servicename of an existing service to the newly
specified.
Command Description
Config DNS ISV-Groups Commands