HP Multi-Site Traffic Director sa9200 - Manual (Page 96)

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide
90
restore Restores a CLI configuration from a previously saved file. (See
save.)
Syntax:
restore <filename>
where:
filename is the name of the configuration file to be restored.
(The default file name is default.cfg .)
Execute the command commit local or commit all to
activate the restored configuration.
restore-verbose As restore above, but displays each line of the restored file.
save
NOTE: Username
commands are not valid in
configuration files, i.e.,
save and restore
operations do not include
username data. Use the
command
config cli
username to restore
user names and passwords.
Saves the current CLI configuration to a file of the specified
name. This information is saved in a text file. (See also restore.)
Syntax:
save <filename>
where:
filename is the file name under which the configuration is
stored. (The default file name is “default.cfg.”)
Command Description
File Management Commands