HP Remote Insight Lights-Out Edition II Board - Manual (Page 122)

Scripting, command line, and utility options 122
Smith to log in using John Smith, rather than CN=John Smith,CN=Users, DC=RILOETEST2,DC=HP. The @
format is also supported. For example, @RILOETEST2.HP in a context field enables the user to log in using
jsmith (assuming that jsmith is the user's short name).
To configure the management processors to communicate with the directory:
1. Enter the user contexts, or click Browse.
2. For Directories Support and Local Accounts option, select Enabled or Disabled.
Remote access is disabled if both Directory Support and Local Accounts are disabled. To reestablish
access, reboot the server and use RBSU F8 to restore access.
3. Click Configure. The migration utility connects to all of the selected management processors and
updates their configuration as you have specified.
4. When the process is complete, click Done.
NOTE: The feature associated with the Management Processor Password field is not available at this time.
This field is provided for forward compatibility with future releases.
HPQLOMGC operation
The command line utility is intended to be used in conjunction with Systems Insight Manager. If you are
not using Systems Insight Manager, consider using the HPQLOMIG utility. The command line mode does
not present a GUI and runs unattended. This mode is intended to work in conjunction with the Application
launch ("
Application Launch using Systems Insight Manager " on page 127 ) functionality.