HP Remote Insight Lights-Out Edition II Board - Manual (Page 142)

Scripting, command line, and utility options 142
<CONFIG_ILO_PRIV value ="No"/>
</ADD_USER>
</USER_INFO>
</LOGIN>
</RIBCL>
ADD_USER parameters
USER_NAME is the actual name of the user. This parameter can be a combination of any printable
characters up to a maximum length of 39 characters. This parameter is case sensitive and must never be
blank.
USER_LOGIN is the name used to gain access to the respective RILOE II. This parameter can be a
combination of any printable characters up to a maximum length of 39 characters. This parameter is case
sensitive and must never be blank.
PASSWORD is the password associated with the user. This parameter is case sensitive and can be a
combination of any printable characters. The length is user defined and can be a minimum of zero
characters and a maximum of 40 characters. The minimum length is defined in the RILOE II Global
Settings and has a default value of eight characters.
ADMIN_PRIV is a Boolean parameter that allows the user to administer user accounts. The user can
modify their account settings, modify other user account settings, add users, and delete users. Omitting
this parameter prevents the user from adding, deleting, or configuring user accounts.
REMOTE_CONS_PRIV is a Boolean parameter that gives permission for the user to access the Remote
Console functionality. This parameter is optional, and the Boolean string must be set to "Yes" if the user
should have this privilege. If this parameter is used, the Boolean string value must never be left blank.
Omitting this parameter denies the user access to Remote Console functionality.
RESET_SERVER_PRIV is a Boolean parameter that gives the user permission to remotely manipulate the
server power setting. This parameter is optional, and the Boolean string must be set to "Yes" if the user
should have this privilege. If this parameter is used, the Boolean string value must never be left blank.
Omitting this parameter prevents the user from manipulating the server power settings.
VIRTUAL_MEDIA_PRIV is a Boolean parameter that gives the user permission to access the virtual media
functionality. This parameter is optional, and the Boolean string must be set to "Yes" if the user should
have this privilege. If this parameter is used, the Boolean string value must never be left blank. Omitting
this parameter denies the user virtual media privileges.
CONFIG_RILO_PRIV is a Boolean parameter that allows the user to configure RILOE II settings. This
privilege includes network settings, global settings, Insight Manager settings, and SNMP settings. This
parameter is optional, and the Boolean string must be set to "Yes" if the user should have this privilege. If
this parameter is used, the Boolean string value must never be blank. Omitting this parameter prevents the
user from manipulating the current configuration.
LOGIN_PRIV is a Boolean parameter that allows the user to log in to the RILOE II and use resources such
as web pages. Marking this parameter with a "No" value or leaving out this parameter effectively
disables the account without deleting it.
The following parameters are not applicable to a user's privileges in the RILOE II firmware versions 1.10
and later. The parameters parse correctly, but user privileges are not affected.
VIEW_LOGS_PRIV is a Boolean parameter that gives the user permission to view the RILOE II system logs.
This parameter is optional, and the Boolean string must be set to "Yes" if the user should be allowed to
view logs. If this parameter is used, the Boolean string value must never be blank.
CLEAR_LOGS_PRIV is a Boolean parameter that gives the user permission to clear the event log. This
parameter is optional, and the Boolean string must be set to "Yes" if the user should be allowed to clear
the RILOE II event log. If this parameter is used, the Boolean string value must never be blank.