HP Remote Insight Lights-Out Edition II Board - Manual (Page 92)

Directory services 92
• Administer Local Device Settings—This option enables the user to configure the RILOE II
management processor settings. These settings include the options available on the Global Settings,
Network Settings, SNMP Settings, and Directory Settings screens of the RILOE II Web browser.
Directory services for eDirectory
The following sections provide installation prerequisites, preparation, and a working example of Directory
Services for eDirectory.
eDirectory installation prerequisites
Directory Services for RILOE II uses LDAP over SSL to communicate with the directory servers. RILOE II
software is designed to install in an eDirectory version 8.6.1 (and above) tree. HP does not recommend
installing this product if you have eDirectory servers with a version less than eDirectory 8.6.1. Before
installing snap-ins and schema extensions for eDirectory, you should read and have available the
following technical information documents, available at Novell Support (
http://support.novell.com ).
Installing Directory Services for RILOE II requires extending the eDirectory schema. Extending the schema
must be completed by an Administrator.
• TID10066591 Novell eDirectory 8.6 NDS compatibility
• TID10057565 Unknown objects in a mixed environment
• TID10059954 How to test whether LDAP is working correctly
• TID10023209 How to configure LDAP for SSL (secure) connections
• TID10075010 How to test LDAP authentication
Snap-in installation and initialization for eDirectory
Refer to "Snap-in installation and initialization (" Snap-in installation and initialization for Active Directory "
on page 85 )" for step-by-step instructions on using the snap-in installation application.
NOTE: After the snap-ins are installed, ConsoleOne and MMC must be restarted to show the new entries.
Example: Creating and configuring directory objects for use with LOM devices in eDirectory
The following example shows how to set up roles and HP devices in a company called samplecorp, which
consist of two regions, region1 and region2.