HP Remote Insight Lights-Out Edition II Board - Manual (Page 15)

Installing the RILOE II 15
• Saving of video captures of reset sequences and failure sequences in the RILOE II memory for later
replay
• Simultaneous transmission of video to the server monitor and to a Remote Console monitor
Item Description
1 AC power adapter connector
2 LAN connector
3 Video connector
4 Keyboard/mouse connector
Keyboard/mouse adapter cable connection
The keyboard and mouse signals must pass through RILOE II. For more information, See the
"Keyboard/Mouse Adapter cable configuration (on page
11 )" section.
Some servers use a Remote Insight cable for the keyboard and mouse and do not require you to use the
keyboard/mouse adapter cable. See the "Server PCI Slot and Cable Matrix (on page
174 )" section to
see if your server requires the keyboard/mouse cable.
To connect the keyboard/mouse cable: