HP Remote Insight Lights-Out Edition II Board - Manual (Page 182)

Troubleshooting the RILOE II 182
such as a server power outage or a server reset, and Remote Insight events, such as a loose cable or
an unauthorized login attempt.
Integrated Management Log
RILOE II manages the IML of the server, which can be accessed by using a supported browser, even when
the server is not operational. This capability can be helpful when troubleshooting remote host server
problems.
The IML enables you to view logged remote server events. Logged events include all server-specific events
recorded by the system health driver, including operating system information and ROM-based POST
codes. For more information, refer to the server guide.
1. Click Clear Event Log to clear the event log of all previously logged information.
2. Click OK to confirm that you want to clear the event log. A line indicating that the log has been
cleared is logged.
Event Log Entries
The following table lists Event Log displays and explanations to help you troubleshoot the RILOE II board.
In the table, USER, #, and IP address are used to designate that a specific user, number, or IP address is
displayed, as appropriate.
Event Log Display Event Log Explanation
Server power failed Appears when the server power fails.
Browser login: IP address Displays the IP address for the browser
that logged in.
Server power restored Appears when the server power
is restored.
Browser logout: IP address Displays the IP address for the browser
that logged out.
Server reset Appears when the server is reset.
Failed Browser login - IP Address: IP
address Appears when a browser login fails.
Remote Insight Self-Test Error: # Appears when the Remote Insight
board has failed an internal test. The
probable cause is that a critical
component has failed. Further use of
this board is not recommended.
Remote Insight Board reset Appears when the board is reset.
On-board clock set; was
#:#:#:#:#:# Appears when the onboard clock
is set.
Server logged critical error(s) Appears when the server logs critical
errors.
Event log cleared by: USER Appears when a user clears the event
log.
Keyboard cable disconnected Appears when the keyboard cable is
disconnected.
Keyboard cable connected Appears when the keyboard cable is
connected.
Remote Insight Board reset to factory
defaults Appears when the board is reset to the
default settings.