HP Remote Insight Lights-Out Edition II Board - Manual (Page 29)

Using the RILOE II 29
Parameter Default value Definition
Primary,
secondary, and
tertiary DNS server N/A Use this parameter to assign a unique DNS server IP address on the
network. By default, the primary, secondary, and tertiary DNS
servers are assigned by DHCP.
Primary and
secondary WINS
server N/A Use this parameter to assign a unique WINS server IP address on
the network. By default, the primary and secondary WINS servers
are assigned by DHCP.
Static routes #1,
#2, #3 N/A for both
the destination
and gateway
address Use this parameter to assign a unique static route destination and
gateway IP address pair on the network. You can assign up to three
static route pairs. By default, the static routes are assigned by DHCP.
Insight Manager
Web Agent
Address http:// N/A Use this parameter to assign the IP address of the host server. Port
number 2301 is automatically appended to the IP address to allow
access to the HP web-enabled Systems Management Agents from
within RILOE II user interface.
Global settings
The Global Settings option enables you to view and modify security settings for RILOE II. The Global
Settings page enables you to configure the Remote Console time-out and RILOE II ports to be used for the
RILOE II web server, Remote Console, and Virtual Media. These settings are applied globally, regardless
of the individual user settings.
To change global settings for RILOE II:
1. Log in to RILOE II using an account that has the Configure RILOE II Settings privilege. Click
Administration.
2. Click Global Settings.
3. Change the global settings as needed by entering your selections in the fields.
After completing any parameter changes, click Apply to save the changes.