Securing rbsu – HP Remote Insight Lights-Out Edition II Board User Manual
Page 69
RILOE II security 69
6.
Expand Computer Configuration>Windows Settings>Security Settings>Public Key
Policies.
7.
Right-click Automatic Certificate Requests Settings, and select New>Automatic
Certificate Request.
8.
Click Next when the Automatic Certificate Request Setup wizard starts.
9.
Select the Domain Controller template, and click Next.
10.
Select the certificate authority listed. (It is the same CA defined during the Certificate Services
installation.) Click Next.
11.
Click Finish to close the wizard.
Securing RBSU
The RILOE II RBSU allows user access for viewing and modifying the RILOE II configuration. RBSU access
settings can be configured using RBSU, browser, RIBCL scripts, and the RILOE II Security Override Switch.
RBSU has three levels of security:
•
RBSU Disabled (most secure)
If RILOE II RBSU is disabled, user access is prohibited. This prevents modification using the RBSU
interface.
•
RBSU Login Required (more secure)
If RBSU login is required, then the active configuration menus are controlled by the authenticated
user's access rights.
•
RBSU Login Not Required (default)
Anyone with access to the host during POST may enter the RILOE II RBSU to view and modify
configuration settings. This is an acceptable setting if host access is controlled.