Set_host_power parameters, Set_host_power runtime errors, Get_vpb_cable_status – HP Remote Insight Lights-Out Edition II Board User Manual
Page 168: Get_vpb_cable_status parameters, Get_vpb_cable_status runtime errors, Get_vpb_cable_status return messages
Scripting, command line, and utility options 168
<SET_HOST_POWER HOST_POWER="Yes"/>
</SERVER_INFO>
</LOGIN>
</RIBCL>
SET_HOST_POWER Parameters
HOST_POWER enables or disables the Virtual Power Button. The possible values are "Yes" or "No."
SET_HOST_POWER Runtime Errors
The possible SET_HOST_POWER error messages include:
•
Server information is open for read-only access. Write access is required for this operation.
•
Virtual Power Button feature is not supported on this server.
•
Host power is already ON.
•
Host power is already OFF.
•
User does not have correct privilege for action.
•
Logged-in user does not have required privilege for this command.
GET_VPB_CABLE_STATUS
The GET_VPB_CABLE_STATUS command displays the Virtual Power Button cable status on the RILOE II.
The GET_VPB_CABLE_STATUS command must be contained within a SERVER_INFO block, and
SERVER_INFO must be in write mode. The user must be logged in with login privilege to execute this
command.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<SERVER_INFO MODE="write">
<GET_VPB_CABLE_STATUS/>
</SERVER_INFO>
</LOGIN>
</RIBCL>
GET_VPB_CABLE_STATUS Parameters
There are no parameters for this command.
GET_VPB_CABLE_STATUS Runtime Errors
The possible GET_VPB_CABLE_STATUS error messages include:
•
Virtual Power Button cable is attached.
•
Virtual Power Button cable is not attached.
GET_VPB_CABLE_STATUS Return Messages
The following information is returned within the response:
<GET_VPB_CABLE
VIRTUAL POWER BUTTON CABLE="ATTACHED"
/>