HP Remote Insight Lights-Out Edition II Board - Manual (Page 133)

Scripting, command line, and utility options 133
• The device will not accept additional XML tags after a syntax error occurs. To send additional XML,
a new connection must be established.
HPONCFG
The HPONCFG utility is an online configuration tool used to set up and configure the iLO management
processor and RILOE II from within the Windows® and Linux operating systems without requiring a reboot
of the server operating system. The utility runs in a command line mode and must be executed from an
operating system command line using an account with administrator or root access.
HPONCFG supported operating systems
HPONCFG is supported on:
• Windows® 2000 Server
• Windows® 2003 Server
• Red Hat Linux Enterprise Linux 2.1
• Red Hat Linux Enterprise Linux 3.0
• United Linux 1.0/SUSE LINUX Enterprise Server 8
HPONCFG requirements
• iLO management processor-based server
For an iLO management processor-based server, the server must have the RILOE II Management
Interface Driver loaded. The SmartStart operating system install process normally installs this driver.
During execution, HPONCFG will warn if it cannot find the driver. If the driver is not installed, it must
be downloaded and installed on the server: You can download the driver from the HP website
(
http://h18023.www1.hp.com/support/files/lights-out/us/locate/20_5867.html#0 ).
For iLO management processor-based servers, HPONCFG requires iLO management processor
firmware version 1.41 or later.
• RILOE II-based server
For RILOE II-based servers, the server must have the RILOE II Management Interface Driver loaded.
During execution, HPONCFG will warn if it cannot find the driver. If the driver is not installed, it must
be downloaded and installed on the server. You can download the driver from the HP website
(
http://h18023.www1.hp.com/support/files/lights-out/us/locate/20_5868.html ).
For RILOE II-based servers, HPONCFG requires RILOE II firmware version 1.13 or later. For a server
Windows® 2000/Windows® 2003, it requires RILOE II Management Interface Driver version
3.2.1.0 or later.
• All servers
For both iLO management processor-based servers and RILOE II-based servers, the server must have
sm2user.dll loaded. This file is automatically loaded along with the HP Insight Management Agents.
During execution, HPONCFG will warn if it cannot find the sm2user.dll file. This file can be installed
separately from the component HP Insight Management Agents for Windows® 2000/Windows®
Server 2003, that can be downloaded as a part of the ProLiant Support Pack on the HP website
(
http://h18004.www1.hp.com/support/files/server/us/download/18416.html ).
After downloading the ProLiant Support Pack, extract its contents to a temporary directory. In the
temporary directory, locate CP004791.exe. Extract the contents of this component to a temporary
directory. In the temporary directory, locate the subdirectory cqmgserv. The sm2user.dll file can be
found in this subdirectory. Copy the sm2user.dll file to the following directory on the server:
Winnt\system32\