HP Remote Insight Lights-Out Edition II Board - Manual (Page 144)

Scripting, command line, and utility options 144
GET_USER
The GET_USER command will return a local user's information, excluding the password. The
USER_LOGIN parameter must exist in the current user database. For this command to parse correctly, the
command must appear within a USER_INFO command block, and USER_INFO MODE can be in read or
write. The user must have the administrative privilege to retrieve other user accounts; else the user can
only view their individual account information.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<USER_INFO MODE="read">
<GET_USER USER_LOGIN="username"/>
</USER_INFO>
</LOGIN>
</RIBCL>
GET_USER parameter
USER_LOGIN is the login name of the user account. This parameter is case sensitive and must never be
blank.
GET_USER runtime errors
The possible GET_USER error messages include:
• User login name must not be blank.
• User login name was not found.
• User does not have correct privilege for action. ADMIN_PRIV required.
GET_USER return messages
A possible GET_USER return message includes the following:
<RESPONSE
STATUS="0x0000"
MSG="No Errors"
/>
<GET_USER
USER_NAME="Admin User"
USER_LOGIN= "username"
ADMIN_PRIV="N"
CONFIG_RILO_PRIV="Y"
LOGIN_PRIV="Y"
REMOTE_CONS_PRIV="Y"
RESET_SERVER_PRIV="N"
VIRTUAL_MEDIA_PRIV="N"
CLIENT_IP=""
/>