HP Remote Insight Lights-Out Edition II Board - Manual (Page 147)

Scripting, command line, and utility options 147
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<USER_INFO MODE="read">
<GET_ALL_USERS />
</USER_INFO>
</LOGIN>
</RIBCL>
GET_ALL_USERS parameters
None
GET_ALL_USERS runtime errors
The possible GET_ALL_USERS error messages include:
User does not have correct privilege for action. ADMIN_PRIV required.
GET_ALL_USERS return messages
A possible GET_ALL_USERS return message is:
<RESPONSE
STATUS="0x0000"
MESSAGE='No Error'
/>
<GET_ALL_USERS>
<USER_LOGIN VALUE="username"/>
<USER_LOGIN VALUE="user2"/>
<USER_LOGIN VALUE="user3"/>
<USER_LOGIN VALUE="user4"/>
<USER_LOGIN VALUE="user5"/>
<USER_LOGIN VALUE="user6"/>
<USER_LOGIN VALUE="user7"/>
<USER_LOGIN VALUE="user8"/>
<USER_LOGIN VALUE="user9"/>
<USER_LOGIN VALUE="user10"/>
<USER_LOGIN VALUE=""/>
<USER_LOGIN VALUE=""/>
</GET_ALL_USERS>
A possible unsuccessful request is:
<RESPONSE
STATUS = "0x0001"
MSG = "Error Message"/>
GET_ALL_USER_INFO
The GET_ALL_USER_INFO command will return all local users information in the user database, excluding
passwords. For this command to parse correctly, the command must appear within a USER_INFO