Ag Leader PFadvantage Harvest & Application Operators Manual - Manual (Page 115)

PFadvantage Direct Drive – Accu-Rate
Ag Leader Technology Application Rate Mode
September 2003 2-103
Setup for Direct
Drive of Accu-
Rate drive
CAUTION: When hydraulics are turned on to the hydraulic
drive, the planter is ready to run. To prevent serious injury
to you or others KEEP CLEAR OF MOVING PARTS.
MANDATORY: You must install and use a planter monitor.
It will inform you of plugged rows or rows not planting.
A separate configuration of settings should be created for every product
applied. A maximum of 16 different configurations can be created. The
screen below illustrates two configurations for a Accu-Rate controller.
1. Press SETUP key. Press APP RATE CONFIG key. A screen
similar to the one below should appear.
APP RATE CONFIG
PRODUCT CONTROLLER CHANNEL
Hybrid A Raws Plant Drive A
Hybrid B Raws Plant Drive A
EDIT
SETTINGS
CREATE
NEW
DELETE EXIT
Press CREATE NEW key. Set the following:
Controller Make: Set to DIRECT.
Controller Model: Set to RAWS PLANT if planting and
RAWS FERT if fertilizing.