Ag Leader PFadvantage Harvest & Application Operators Manual - Manual (Page 208)

Gridding PFadvantage
Site Verification Mode Ag Leader Technology
September 2003 4-58
Introduction
To use this feature the PFadvantage must be in Site Verification Mode.
Before gridding, you must have a boundary file for the field. When using
this feature, the entire PFadvantage screen is gridded, but only the grid
points inside the boundary will be displayed. The points are created with a
preset name starting with Point 1 in the northwest corner of the field and
ending in the southeast corner of the field. See example below. The order of
points is from west to east, then south, then east to west, then south. The
grid spacing may be set in either feet or acres. At this time, the grid points
may only be shifted as a whole, not individually.
The PF saves the grid to a *.PFN file. Contact Ag Leader Technology for
information regarding mapping programs that support *.PFN grid files.
Boundary
Grid Area in Feet or Acres
(4)
+
(8)
+
(7)
+
(2)
+
(5)
+
(6)
+
(1)
+
(3)
+
Grid Points Not
Displayed
+
+
+ +
+
(9)
+