Ag Leader PFadvantage Harvest & Application Operators Manual - Manual (Page 28)

Creating, Naming Fields, Loads PFadvantage
All Modes except App Rate Ag Leader Technology
September 2003 2-16
Step Action
4 Creating Loads
Press the UP ARROW key to scroll through all the loads in the field
for the grain type. Once you scroll past the last load, “Create New
Load” will be displayed above the load number and name. Name
the load for the displayed grain/site type, then with “Create New
Load” displayed above the load number press the ACCEPT key to
create the new load.
5 Repeat step 4 and create and name all your loads.
Note: Refer to Load Setup to change grain, product or site type for an
existing load.
Changing Fields
and Loads
Changing Field
Press the FIELD key to display current field. Press the UP or DOWN
ARROW keys to scroll through the fields. Press the ACCEPT key to
change to the different field.
Changing Load
Press the LOAD key to display the current load. Press the UP or DOWN
ARROW keys to scroll through the loads. Press the ACCEPT key to
change to the different load.
* * *