Ag Leader PFadvantage Harvest & Application Operators Manual - Manual (Page 42)

Vehicle Setup PFadvantage
Harvest Mode Ag Leader Technology
September 2003 2-30
Introduction For each operating mode, there are different items to setup in the vehicle
setting screen. Below are the setup items for the harvest mode. Refer to
your Initial Calibration Sheet to make the correct settings.
Vehicle Setup
Screen To view the vehicle setup screen press the:
MENU key
SETUP key
bottom RIGHT ARROW key
VEHICLE key
Example of vehicle setup screen:
VEHICLE SETUP
Elevator pulses / revolution 1 Pulses
Sprocket teeth 8 Teeth
Combine scale factor 1.0
Area count stop beeps 20 Beeps
Expand grain below dry % NO
Sensor calibration 1400
T1 10
T2 5
T3 8
Primary speed sensor WHEELS
Secondary speed sensor ---------
Speed sensor pulses / 100 ft 2000 Pulses
EDIT EXIT
ACCEPT CANCEL