MagTek EC2000 99875600 - Manual (Page 27)

6 - Operation
ExpressCard 2000| Instant Issuance Card Personalization System | User Installation and Operation Manual
Page 27
6 Operation
6.1 Finding the Serial Number
Some procedures in this manual (such as product authorization, updates, and password resets) require
using the device’s serial number, sometimes in combination with other characters. The device’s serial
number is a seven-character alphanumerical code starting with “B,” and can be found on the rear of the
device or in the upper left corner of the
Help page (see section 6.3.3 About the Help Page for details).
6.2 Powering On, Shutting Down, and Restarting
To power on the EC2000, press the round power button on the front of the device (see Figure 6-1).
Figure 6-1 - Powering On the EC2000
The EC2000 will take about one minute to initialize, during which the screen will be blank. After
the device has booted, it will display the
Status page, which looks like Figure 6-2 or Figure 6-3,
depending on how the device is configured (see section 6.11.4 About the Transaction Queue and
section 8.9.1 About the QueueDisplay Configuration Option for details).
Figure 6-2 - Status Page If QueueDisplay = True