MagTek EC2000 99875600 - Manual (Page 49)

6 - Operation
ExpressCard 2000| Instant Issuance Card Personalization System | User Installation and Operation Manual
Page 49
The specific EC2000 features available to a user depend on the card personalization software, its
configuration, and the configuration of the EC2000. For setup and usage instructions for card
personalization software, see the documentation for the software you are using.
6.11.3 About Transactions
Every request a user sends to the EC2000 to process a card is sent as a transaction. Transactions contain
instructions telling the EC2000 to perform one or more operations to the card. Common transactions
include issuing a new personalized card or changing the card PIN.
6.11.4 About the Transaction Queue
The EC2000 receives transactions from card personalization software either directly through a Local Area
Network, or by polling an Internet site. The card personalization software can send a transaction for
immediate processing, or may direct the EC2000 to hold the transaction in a queue.
When it receives queued transactions, the EC2000’s configuration determines whether it will immediately
process them or hold them in the queue until a user signals the EC2000 to process them. The EC2000
indicates queued transactions need to be manually processed by showing “AutoProcess: OFF” in the
lower right corner of the queue (see Figure 6-30).
Users will not be able to see or interact with queued transactions on the Status page unless
the EC2000 is configured to display the transaction queue. See section 6.11.4 About the
Transaction Queue and section 8.9.1 About the QueueDisplay Configuration Option for details.
Figure 6-30 - Status Page With Transaction Queue
6.11.5 How to Process Transactions In the Transaction Queue
To process the top transaction listed in the queue on the EC2000’s Status page, do one of the following:

If you want to turn the AutoProcess ON so all future transactions will be processed automatically,
press the Resume button.

If you want to keep AutoProcess OFF so transactions will continue to be held in the transaction queue
for manual processing, press the Print button.