MagTek EC2000 99875600 - Manual (Page 35)

6 - Operation
ExpressCard 2000| Instant Issuance Card Personalization System | User Installation and Operation Manual
Page 35
Table 6.1 - EC2000 Password Types
Password Type Asterisk Color Associated Features
Setup Password 1
Setup Password 2 Red ( * ) Change TCP/IP Settings
Update software / firmware
Edit configuration values
Service Password 1
Service Password 2 Blue ( * ) Direct control of components in the device,
including image printer, embosser.
Unlock Password 1
Unlock Password 2 Gold ( * ) Unlock the top access door
Key Entry Password 1
Key Entry Password 2 Purple ( * ) Load encryption keys
Administrator Yellow ( * )
Unlock “lockdown mode” after a user enters an
incorrect set of passwords three times.
6.7 Card Stock
Figure 6-13 - Card Stock Hopper and Blank White Card Stock
6.7.1 About Card Stock
Note: Although the EC2000 is equipped with card cleaning rollers, it is very important to
print only onto clean, flat, polished cards designed for direct-to-card thermal printing.
Print head damage caused by contaminated or poor-quality cards will void the print head’s
factory warranty.

Keep card stock sealed in dust-free plastic bags before use.

Do not print onto cards that have been dropped, touched, or soiled.
The EC2000 prints onto standard CR80-sized (3.375”L × 2.125”W × .030”T or 86mmL × 54mmW ×
0.75mmT) PVC card stock. To order card stock specifically designed for use with the EC2000, contact
your sales representative or see Appendix A.