MagTek EC2000 99875600 - Manual (Page 47)

6 - Operation
ExpressCard 2000| Instant Issuance Card Personalization System | User Installation and Operation Manual
Page 47
6.10 Indent Printer
6.10.1 About the Indent Printer
The EC2000 can perform indent printing on the rear of cards if an indent ribbon cartridge is loaded (see
section 2.2 Introduction to EC2000 Components). To order indent ribbon cartridges designed for use
with the EC2000, contact your sales representative or see Appendix A.
6.10.2 How to Install / Remove the Indent Ribbon Cartridge
To remove an indent ribbon cartridge from the EC2000’s indent printer, follow these steps (see this
YouTube video for a demonstration):
1) Open the top access door (see section 6.5 Top Access Door Security for details).
2) Navigate to Menu > Maintenance to open the Maintenance Menu page.
3) Press the Unload Cartridge button to move the indent ribbon cartridge out of the embosser.
Figure 6-28 - Indent Cartridge Release Button
4) Press the orange release button next to the indent ribbon cartridge shown in Figure 6-28.
5) Lift the indent ribbon cartridge toward the ceiling to remove it.
To install an indent ribbon cartridge for the EC2000’s indent printer, follow these steps: