3 the touchscreen, 1 about the touchscreen, The touchscreen – MagTek EC2000 99875600 User Manual

Page 28: About the touchscreen, Figure 6-3, 6 - operation

Advertising
background image

6 - Operation

ExpressCard 2000| Instant Issuance Card Personalization System | User Installation and Operation Manual


Page 28

Figure 6-3 - Status Page If QueueDisplay = False

To shut down the EC2000, press the power button on the front panel and wait until the blue power button
light turns off. Shutdown will take a maximum of 35 seconds.

To restart the EC2000, press the power button on the front panel and wait until the blue power button
light turns off, then press the power button again to power it back up.

6.3 The Touchscreen

6.3.1 About the Touchscreen

Treat the EC2000’s touchscreen as you would any other LCD monitor:

Do not touch the touchscreen with sharp or rough objects.

Do not use chemical cleaners on the touchscreen.

Do not use abrasive cleaners or cleaning tools on the touchscreen.

Do not spray the touchscreen directly or use excessive amounts of water to clean it.


The touchscreen on the front of the EC2000 can be operated using either the included stylus or a fingertip.
If the touchscreen accumulates smudges or fingerprints, wipe it using a soft dry cloth. If that fails to
remove the smudges, moisten the cloth and wipe the touchscreen again. If smudging continues to be a
problem, instruct users to wash their hands before using the device, or to use the included stylus or the
corner of a blank stock card instead of their fingers.

6.3.2 About the Status Page

The

Status

page is the default page displayed on the EC2000’s touchscreen. It shows the system’s

current status, including whether the device is “Ready” or “Offline,” and error messages that may prevent
normal operation. If the “Queue Display” feature is enabled, it will also show a list of all transactions that
have not yet been processed by the device (see 6.11.4 About the Transaction Queue and section 8.9.1
About the QueueDisplay Configuration Option
for details). Press the

Status

button at any time to

return to this page.

When the

Status

page shows the EC2000 is “Offline,” the device will not process cards.

Advertising