Sony DPP-FP70 - Manual (Page 22)

22 GB
Items Procedures
Changes the image into a
monochrome picture.
Corrects the red-eye
phenomenon. (Page 16)
AUTO TOUCH-UP
Automatically adjusts a failed
photo having problems such as
backlit, out-of-focus, or red-
eye phenomenon, by pressing
the button on the printer.
9
Press g/G to select and press
ENTER.
The preview of the ID photo print is
displayed.
Tip
To save and print the ID photo previewed, see
page 17.
Note
An ID photo print may not be able to be used
for an identification card or passport. Please
check the requirements for the photo to be used
in the certificate before you submit the card or
passport.
6
Press f/F to select and press
ENTER.
The window for selecting an image is
displayed.
7
Press g/G/f/F to select the
desired image, and then press
ENTER.
The window used for adjusting the
image position is displayed.
8
Adjust the size and position of the
selected image.
Press g/G to select the desired
adjustment item, then press ENTER.
Adjustment tools
Items Procedures
/ Increases or reduces the size of
an image by pressing the
buttons on the printer.
Move the image with g/G/f/
F
, and then press ENTER.
Each time you press ENTER,
the image rotates 90°
clockwise.
Press f/F to select the desired
adjustment item and press
ENTER. Adjustment slider is
displayed. Press g/G to move
the slider to the desired
position to adjust the
brightness, tint, saturation, or
sharpness level.