Sony DPP-FP70 User Manual
Printing from a PC
The setup starts.
When “Sony DPP-FP60/70/90
printer driver has been
successfully installed.” dialog is
displayed, click “Finish”.
Connect the printer to the AC
power source (. Read This
Press 1 (on/standby) switch to
turn on the printer.
Connect the USB connectors of
the printer and your PC with a
USB cable (not supplied).
Printer driver installation starts
Use a B-type USB cable shorter than 3m in
Wait for a while, then check to
see that “Sony DPP-FP70” or
“Sony DPP-FP90” is added to the
“Printers and Faxes”.
When the installation is complete,
remove the CD-ROM from your PC
and keep it for future use.
To continue to install the Picture
Motion Browser software, follow the
procedures from step 2 on page 42.
• If the installation fails, remove the printer
from your PC, restart your PC, and then do
the installation procedures from the step 2.
• After installation, the “Sony DPP-FP70” or
“Sony DPP-FP90” is not set as the default
printer. Set the printer you use for each
• The supplied CD-ROM will be required when
you uninstall or re-install the printer driver.
Keep it in good order for possible future use.
• Before you use the printer, read the Readme
file (the Readme folder of the CD-
When the software is installed
is displayed on the Windows
desktop, as well as a shortcut to the web
site for printer customer registration. If
you finish registration, you can find
support information at: