IPricot IPR-S1000 - Manual (Page 15)

Configuring the IPR-S1000
10
Configuring the IPR-S1000
I The LCD interface
This chapter describes how to use the Liquid Crystal Display interface
to manage the IPR-S1000. The LCD interface is mostly useful for the
initial configuration. After that configuration, we strongly advise you to
use the Web or Telnet interface. Indeed, these two interfaces will allow
you to configure the IPR-S1000 in a more complete way.
1. Overview
To select each element of the menu, press the «up» and/or «down»
arrows. The «right» arrow, showing at the edge of the screen line,
points out the selected element. To return to the previous screen, press
the «left» arrow. To enter the selected element, press the «right»
arrow.
During a traditional data entry (numerical or textual), the «right» arrow
moves the cursor on to the next right character, or to the next data field,
if positioned on the last character in row. The «left» arrow moves the
cursor on to the next left character or to the next data field if positioned
at the first character of the line. The function keys «+» and «-» allow to
change the character currently covered by the cursor. Most of the time,
the «up» arrow cancels the current selection, whereas the «down»
arrow confirms it.
2. Basic screens
After the IPR-S1000 connection, three screens appear on the LCD.
They are linked together with a five seconds delay between each of
them. You cannot do any modifications on them.
DVB
The first screen displays satellite reception conditions.
Example:
Note: To go to the Main menu, press any key.
12.379 V + Auto
27500K 11.0dB