IPricot IPR-S1000 - Manual (Page 97)

Configuring the IPR-S1000
92
becomes available. This does not mean that the PPTP connection is
established: the PPTP session remains down as long as no packets
are transmitted by this interface.
pptp.authname
Contains the authentification login.
pptp.connect_timer
It is the timeout of the first connection. It is recommended to set a value
just greater than the time to set up the PPP link.
pptp.debug
Allows to have debugging information in the IPR-S1000 logging system
(see Syslog).
pptp.keep_alive_timer
Allows to configure the time between the keep-alive frames.
pptp.options
The list of the options of PPTP connection.
pptp.password
Contains the password.
pptp.pns
Contains the IP address or the FQDN of the PNS, i.e. the PPTP server.
pptp.retry
It is the number of time the connection to the PNS is made. There after,
the connection fails, and the PPTP process is reinitialized.
pptp.retry_timer
Timeout of the connections after the first one, which is configured by
«connect timer».
snmp.active
Activation of SNMP service.
snmp.community
Community for the access in reading mode only.
snmp.wcommunity
Community for the access in reading and writing mode.
snmp.syscontact
Syscontact key of MIB II.
snmp.syslocation
Syslocation key of MIB II.
snmp.traps
Allows to configure the IP address of the manager and the community