IPricot IPR-S1000 - Manual (Page 19)

Configuring the IPR-S1000
14
1) In the «1. Set config» menu, select «11. DVB».
2) Enter that menu by pressing the «right» arrow.
3) With the «down» arrow, select «113. Bauds», and enter that menu
by pressing the «right» arrow.
Example:
4) Enter a value by using the same method that you used to set the IP
address.
5) Confirm the value by pressing the «down» arrow.
114. FEC (Forward Error Correction)
This screen allows you to modify the FEC value.
1) In the «1. Set config» menu, select «11. DVB».
2) Enter that menu by pressing the «right» arrow.
3) With the «down» arrow, select «114. FEC», and enter that menu by
pressing the «right» arrow.
Example:
4) With the «+» or «-» key, select «Auto».
5) Confirm the selection by pressing the «down» arrow.
115. Polarization
This screen allows you to modify the polarization type.
1) In the «1. Set config» menu, select «11. DVB».
2) Enter that menu by pressing the «right» arrow.
Bauds:
27500.00 Kbauds
FEC:
Auto
1/2
2/3
3/4
4/5
5/6
6/7
7/8
8/9