IPricot IPR-S1000 - Manual (Page 31)

Configuring the IPR-S1000
26
1) With the «+» or «-» key, enter the new password.
2) Confirm the selection by pressing the «down» arrow.
16. Chg. read pwd
This screen allows you to enter a new password for the read level.
1) With the «+» or «-» key, enter the new password.
2) Confirm the selection by pressing the «down» arrow.
17. Update firmware
This screen allows you to download a new firmware from a TFTP
server.
To start the download process, press the «down» arrow. To cancel it,
press the «up» arrow.
18. Backup firmware
This screen allows you to save the current firmware to a TFTP server.
To start the upload process, press the «down» arrow. To cancel it,
press the «up» arrow.
19. Auto update
This screen allows you to enter the reception code in order to activate
the reception process. These five decimal numbers shall be provided
by the satellite operator in charge of the update.
To confirm the password and proceed with the updating, press the
New write password:
* * * * * * * *
New read password:
* * * * * * * *
TFTP Server addr.:
192.168.001.004
TFTP Server addr.:
192.168.001.004
Receipt code:
224.005.004.003.4321