IPricot IPR-S1000 - Manual (Page 27)

Configuring the IPR-S1000
22
4) With the «+» or «-» key, fill in one or two fields (IP address type field).
5) Confirm the values by pressing the «down» arrow.
135. Bridging
A bridge is a product that connects a local area network (LAN) to
another local area network that uses the same protocol.
This screen allows you to select a bridging mode (affects both Unicast
and Multicast).
1) In the «1. Set config» menu, select «13. IP».
2) Enter that menu by pressing the «right» arrow.
3) Select «135. Bridging», and enter that menu by pressing the «right»
arrow.
Example:
4) With the «+» or «-» key, select a mode.
5) Confirm the selection by pressing the «down» arrow.
136. ICMP redirect
Internet Control Message Protocol.
This screen allows you to enable or disable the ICMP redirect
functionality.
1) In the «1. Set config» menu, select «13. IP».
2) Enter that menu by pressing the «right» arrow.
3) Select «136. ICMP redirect», and enter that menu by pressing the
«right» arrow.
Example:
4) With the «+» or «-» key, select «Yes» or «No».
DNS 1: 000.000.000.000
DNS 2: 000.000.000.000
Bridging traffic:
Bridge only
Analyse & bridge
ICMP redirect:
Yes
No