IPricot IPR-S1000 User Manual

Page 45

Advertising
background image

Configuring the IPR-S1000

40

LNB

In the drop-down menu, select yes to supply power to the LNB.

In the drop-down menu, select the type of LNB.
In case the predifined values do not meet your requirements, you may then
manually configure them in the following menu.

In the field, enter the lower bound of the low frequency band.

In the field, enter the upper bound of the low frequency band.

In the field, enter the low band local oscillator.

In the field, enter the low bound of the high frequency band.

In the field, enter the upper bound of the high frequency band.

In the field, enter the high band local oscillator.

Receiving parameters

Advertising