IPricot IPR-S1000 - Manual (Page 71)

Configuring the IPR-S1000
66
The program will stop after this number of seconds.
Allows one to specify which packets will be displayed.
Allows one to specify the number of bytes that will be displayed.
If selected, TS Dump will display the PID number before each TS packet.
If selected, TS Dump will display each PID’s bit rate at the end of the dump.
If selected, TS Dump will display the start and end dates at the end of the dump.
If selected, TS Dump will display the number of TS packets received for each
PID at the end of the dump.
In the respective blank fields, enter the address, port, login, password and path.