IPricot IPR-S1000 - Manual (Page 26)

Configuring the IPR-S1000
21
(Yes routing), or as a multicast bridge (Yes bridging).
1) In the «1. Set config» menu, select «13. IP».
2) Enter that menu by pressing the «right» arrow.
3) Select «133. Multicast», and enter that menu by pressing the
«right» arrow.
Example:
4) Select Multicast On/Off or New network address, and enter the
selected menu by pressing the «right» arrow.
Multicast On/Off:
1) With the «+» or «-» key, select a mode.
2) Confirm the selection by pressing the «down» arrow.
Accept src addr:
1) With the «+» or «-» key, enter the new network address.
2) Confirm the value by pressing the «down» arrow.
134. DNS
Domain Name System. The distributed name/address mechanism
used in the Internet.
This screen allows you to reference domain names instead of their
actual IP address for easier recollection.
1) In the «1. Set config» menu, select «13. IP».
2) Enter that menu by pressing the «right» arrow.
3) Select «134. DNS», and enter that menu by pressing the «right»
arrow.
Example:
> Mcast forwarding
Accept src addr
Mcast forwarding :
Yes (routing)
Yes (bridging)
No
New network address:
000.000.000.000/00