IPricot IPR-S1000 - Manual (Page 37)

Configuring the IPR-S1000
32
For the IPR-S1000, the input bandwidth (at IP level) is limited to 40000 Kbits/s.
.
Eb/No is related to the signal/noise (in dB). In other words, it refers to the signal
quality. The user’s signal will be considered as quasi error free if Eb/No is
greater than 5.5 dB for FEC 3/4. This corresponds to a Vber of 2x10-4.
DVB uncor. packets is the total number of packets that could not be corrected
by the demodulator. Clicking on the «reset» link sets the counter back to zero.
IP/DVB input packets corresponds to the number of IP packets received on the
DVB interface.
IP/DVB dropped packets corresponds to the number of (intentionaly) isolated
packets.
RX-SIG: Reception signal. It indicates if the signal is received (green color) or
not (red color).
VITSYNC: Viterbi Synchronized. It indicates if the Viterbi decoder is
synchronized (green color) or not (red color).
FSYNC: Frame Synchronized. It indicates if the deintervealer is synchronized
(green color) or not (red color).