IPricot IPR-S1000 - Manual (Page 81)

Configuring the IPR-S1000
76
-Right and left arrows.
-Backspacing.
-Up and down scrolling arrows (for back and forth travelling between
command entries).
-Tab key (allows you to ask for text completion possibilities before the
cursor). When you first press the key, it tries to complete the text. The
second time you press the key, it gives you all the possibilities (in the
event that there would be more than one available).
Example:
You can use the TAB key to discover command parameters:
# Unlock> dvb <TAB><TAB>
conso lock mpebytes temp vber
dlevel macaddress mpepackets tuner_temp voltage
fec macaddresses sn uncor wlock
# Unlock> dvb _
You can obtain a short documentation for each command with the help
command:
# Unlock> help dvb
dvb real-time access to the dvb interface
# Unlock> _
Press the TAB key twice : <TAB><TAB>
? get ls rm
abort getdefault mget save
auth go mv set
bye help nat spectrum
default ipdump netstat syslog
defaultfactory ipf ping system
delete lastprofile ppp tftpload
dvb list pptp tftpsave
dvbdump load quit traceroute
exit loadfactory rename tsdump
2. Commands
Here is the list of all the commands that you can use in the Telnet
session. Some parameters are compulsory. They are preceded by
«+», and underlined as follows:
Example: + name of the profile
With the write login: