IPricot IPR-S1000 - Manual (Page 75)

Configuring the IPR-S1000
70
In the drop-down menu, select the interface.
In the blank field, enter a number of packets.
In the drop-down menu, select the protocol.
In the drop-down menu, select to enable or disable promiscuous mode.
In the blank field, enter the dump duration (in seconds).
In the blank field, enter a number corresponding to the bytes per packet.
IP
In the respective drop-down menus, select the IP parameters. In the blank field,
enter the IP address.
Ethernet
In the respective drop-down menus, select the Ethernet parameters. In the
blank field, enter the Ethernet address.
Size