IPricot IPR-S1000 - Manual (Page 23)

Configuring the IPR-S1000
18
3) With the «down» arrow, select «11C. LLC-SNAP», and enter that
menu by pressing the «right» arrow.
Example:
4) With the «+» or «-» key, select LLC-SNAP traffic.
5) Confirm the selection by pressing the «down» arrow.
11D. MAC filtering
This screen allows you to specify the number of bytes on which MAC
filtering will be proceeded.
1) In the «1. Set config» menu, select «11. DVB».
2) Enter that menu by pressing the «right» arrow.
3) With the «down» arrow, select «11D. MAC filtering», and enter that
menu by pressing the «right» arrow.
Example:
4) With the «+» or «-» key, select a number of bytes.
5) Confirm the selection by pressing the «down» arrow.
12. Ethernet
121. IP address
This screen allows you to set the IP address.
1) In the «1. Set config» menu, select «12. Ethernet».
2) Enter that menu by pressing the «right» arrow.
3) Select «121. IP address», and enter that menu by pressing the
«right» arrow.
LLC-SNAP traffic:
Discard
SNAP 802.1
SNAP 802.2 (UDLR)
SNAP 802.1/802.2
MAC address
filtering on 6 bytes
Ethernet
121. IP address
122. Media type