IPricot IPR-S1000 - Manual (Page 95)

Configuring the IPR-S1000
90
ip.keepforus
Yes if bridged traffic is analyzed, No otherwise.
ip.macaddr
Source MAC address policy for bridging MPE traffic.
ip.mcast_addr
List of multicast senders IP addresses.
ip.multicast
Multicast 0=none, 1=routing, 2=bridging.
ip.netforward
Unicast 0=none, 1=routing, 2=bridging.
ip.routes_gateway
List of routes by/per gateway.
ip.routes_iface
List of routes by/per interface.
ipcrypt.active
Allows to activate or not IP Crypt functionality.
ipcrypt.rules
Allows to define the rules (up to 100 rules).
ipf.active
Allows to activate or not filtering (firewall).
ipf.rules
Allows to define the filtering rules.
ipf.rules_ppp_up
Filtering rules that will be installed at PPP connection, and removed at
PPP disconnection.
macaddress.addresses
Allows to add additional MAC addresses.
misc.code_r
Password for read access/manages the password in reading mode.
misc.code_w
Password for write access/manages the password in writing mode.
misc.tftpserver
Allows to back up the address of the TFTP server used.
nat.active
Allows to activate NAT (Network Address Translation) service.