Festo Кабели и принадлежности - Manual (Page 50)

4. Commissioning
4−12
Festo P.BE−SPC200−COM−CANDN−EN en 0511a
6. Select the register card Field bus I/O".
Fig. 4/5: I/O assignments
7. Undertake the desired I/O assignments (Mapping).
For an explanation of the mappings seeĂalso Fig. 1/5.
8. Confirm the settings with OK.
The settings will be transmitted to the SPC200 when the
project is loaded and will then become valid.
Please note
Part download: If you click on Download" in a dialogue
window (e.g. in the window SPC200 configuration"), only
the settings of the currently open register will be transĆ
mitted.
· Select [Online] [Download] [Project]ā, if you wish to
transmit
all the parameters.