Festo Электроцилиндр - Manual (Page 86)

5 Commissioning
86 Festo – GDCP-CMMO-ST-EA-SY-EN – 1301a – English
5.10 Instructions on operation
During operation, the same safety instructions must be observed as for the commissioning procedure
( section 5.1).
Password protection
Password protection is preset in the factory to inactive. In order to prevent unauthorised or uninten-
tional overwriting or modification of parameters in the device, you can set up a password in FCT
( online help for the plug-in).
This password is also valid for the web browser.
Maintenance and care
CMMO-ST motor controllers are maintenance-free. However, follow the maintenance instructions for
the drive and the additional components.
Disposal and environment
Note
• Observe the local regulations for environmentally friendly waste management of
electronic components.