Konica Minolta bizhub C451 - Manual (Page 159)

Useful transmission functions 6
C451 6-18
5
Select the targeted end settings and then touch [OK].
– Touch [No] to cancel book-copy function.
– If [Separation], [Front cover] or [Front + Back Covers] is selected,
[Binding Position] is displayed. Select to match the binding orienta-
tion of the original and then touch [OK].
– Specify the “Book Erase”, if required. Select the erase method,
specify the deletion width with the keypad or [-] and [+] and touch
[OK].
– The black shadow in the surrounding and center part can be erased
by setting “Book Erase”. “Book Erase” can be used in combination
with other functions.
– Center Erase Screen
For European models (Metric)
For setting the Center Erase values in European models (Metric),
press keypad or [-], [+]. “Input Error” is displayed when a numerical
value outside the range is input. When “Input Error” is displayed or
when there is any mistake while entering the deletion width, press
[C] (clear) key and enter the value again.