Konica Minolta bizhub C451 - Manual (Page 191)

Useful transmission functions 6
C451 6-50
– To directly enter the body, touch [Direct Input], enter the body and
touch [OK].
12
Touch [Close].
Returns to Communication Settings screen.
13
Touch [Close].
Returns to Fax/Scan screen.
14
Set other functions if required.
– For details on Scan Settings, refer to “Specifying the scan condi-
tions” on page 2-19 or “Original Settings” on page 6-4.
– For details on Original Settings, refer to “Original Settings” on
page 6-4.
– For details on Communication Settings, refer to “Communication
Settings” on page 6-5.
15
Press [Start] key.
– To stop the transmission, refer to “Stopping the transmission” on
page 2-52.
– When fax cannot be sent, refer to “Troubleshooting” on page 4-2.
The scanned original is stored in the memory as a scheduled job and
transmission is started.
2
Note
For details on “Administrator Registration”, refer to “Registering E-mail
address of this machine (Input Machine Address)” on page 9-51.
Regardless of the From setting, the e-mail address specified in the Ad-
ministrator Registration screen of Utility mode is used as the From ad-
dress.