Konica Minolta bizhub C451 - Manual (Page 64)

Transmission 2
C451 2-21
Simplex/Duplex
Set the scanning mode in ADF as per the original condition.
The 3 types of scanning modes are as follows.
At the time of purchase, mode is set to [1-Sided].
- [1-Sided]: Touch to scan 1-sided original.
- [2-Sided]: Touch to scan 2-sided original.
- [Cover + 2-Sided]: Touch to scan cover and 2-sided original. Only the
front side is scanned for cover page and the back side is also scanned
from the second page onwards.
Resolution
Set the resolution to get a fine scanned original.
There are following 4 types for Resolution.
At the time of purchase, resolution is set to [200 × 200 (Fine)].
- [200×100 (Standard)]:
Touch when transmission time is to be shortened.
- [200×200 (Fine)]:
Touch to scan the normal original.