Konica Minolta bizhub C451 User Manual

Page 302

Advertising
background image

Utility mode

9

C451

9-56

9.16

Specifying E-mail transmission settings (E-Mail TX
(SMTP))

E-mail transmission (SMTP) is set.

E-Mail TX (SMTP): ON */OFF

-

Whether or not to use E-mail TX (SMTP) is set.

Scan to E-mail

-

ON*/OFF

SMTP Server Address: IP address and host name of SMTP server are set.

Connection Timeout: 30 - 300 (60 seconds*)

-

Connection timeout is set.

Server Capacity: 1-100Mbyte / No Limit*

-

The maximum capacity for 1 E-mail that can be received through SMTP
server is set.

Port No.: 1 - 65535 (25*)

-

The port No. is set.

SSL Setting: SMTP over SSL / Start TLS / OFF*

-

Select whether or not SSL is used during Internet fax transmissions.
When SSL is used, communication information is encrypted.
If “SMTP over SSL” or “Start TLS” is selected, specify a setting for “Port
Number (SSL)” (between 1 and 65535 (465*)).

SMTP Authentication: ON/OFF*

-

POP Before SMTP and whether or not to carry out SMTP authentication
are set.
When [ON] is set, specify the following settings
SMTP Authentication settings
POP Before SMTP Authentication: ON/OFF*
POP Before SMTP Time: 0 - 60 (5 seconds*)

* is a default value at the time of purchase.

!

Detail

Other settings of E-mail TX (SMTP) are not used in Internet Fax. For de-
tails, refer to the User’s Guide [Network Scanner Operations].

The document is not divided in Internet Fax even if “Binary Division” is set
to [ON].

Advertising
This manual is related to the following products: